1. Get the necessary tools

Montaż zestawu Original Prusa i3 MK2

• 1. Introduction
• 2. Y-axis assembly
• 3. X-axis assembly
• 4. Z-axis assembly
• 5. Extruder Assembly [Tłumaczenie w toku]
  1. Get the necessary tools
  2. 3D printed parts
  3. [TIP] Top nut insertion
  4. Placing the nuts
  5. Preparing extruder body
  6. Preparing the extruder cover
  7. Placing the extruder cover
  8. Preparing the extruder motor
  9. Mounting the motor and idler
  10. Tightening the pulley
  11. VIDEO for step 11
  12. Prepare the Extruder idler
  13. Preparing shaft with bearing
  14. Prepare the Extruder idler screws
  15. Placing the screws
  16. Preparing the print fan
  17. Preparing the fan nozzle
  18. P.I.N.D.A. probe preparation
  19. P.I.N.D.A probe and print fan cables preparation
  20. P.I.N.D.A. probe mounting
  21. Mounting the fan
  22. Tighten fan screws
  23. Preparing for extruder mounting on X-axis
  24. Extruder cables preparation
  25. Arranging extruder cables
  26. Securing extruder in place
  27. Preparing the filament
  28. Cable management - right side
  29. [OPTION1] Cable management - part one
  30. [OPTION1] Cable management - part two
  31. [OPTION2] Cable management - hot end cables
  32. Finalizing x-carriage cable management
  33. Finalizing cable management
  34. [OPTIONAL] P.I.N.D.A. protector assembly
  35. Preparing the spiral wrap
  36. Spiral wrap ziptie
  37. Finalizing extruder
  38. All done!
• 6. LCD assembly
• 7. PSU & Heatbed assembly
• 8. Electronics assembly
• 9. Preflight check