1. Begin assembly

Printer maintenance

• How to rebuild the Nextruder Hotend
• How to install HT Hotend Upgrade (CORE One/+, CORE One L/+)
• How to install Prusa OpenPrintTag upgrade (CORE One+/CORE One L)
• How to replace a HT Hotend Thermistor
• How to replace a HT Hotend Heater
• How to replace the Prusa Nozzle (HT Hotend)
• How to replace the main cable (CORE One L/+)
• How to install the Nextruder V6 nozzle adapter (CORE One L/+)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to replace the door sensor (CORE One L)
• How to install the Advanced Filtration (CORE One L)
• How to replace the Buddy3D camera cable (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Heatsink Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this chapter
  4. Removing the door panel
  5. Removing the hinges
  6. Magnet holders: parts preparation
  7. Installing the door magnets
  8. Door hinges: parts preparation
  9. Installing the inner hinges
  10. Installing the outer hinges
  11. Door panel: parts preparation
  12. Mounting the door panel
  13. Well done!
• How to replace LoveBoard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace the White LED strip (CORE One L)
• How to pack CORE One L for return
• How to replace the heatbed fans (CORE One L)
• How to replace the heatbed (CORE One L)
• How to replace the AC box (CORE One L)