1. Begin assembly

Printer maintenance

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the Advanced Filtration (CORE One L)
• How to replace the Buddy3D camera cable (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace the White LED strip (CORE One L)
• How to pack CORE One L for return
  1. Begin assembly
  2. Introduction
  3. Original packaging
  4. Prerequisites
  5. Tools necessary for this guide
  6. Preparing the printer
  7. Removing the spoolholder
  8. Disconnecting the Buddy3D camera
  9. Securing the heatbed
  10. Removing the LCD panel
  11. Parts preparation: LCD panel padding
  12. Securing the LCD panel (part 1)
  13. Securing the LCD panel (part 2)
  14. Securing the X-Axis
  15. Securing the door
  16. Packing the acessories
  17. Adding the bottom cardboard
  18. Placing the printer into the box
  19. Sealing the printer box
  20. Securing the printer box
  21. Sealing the main box