1. Begin assembly

Printer maintenance

• How to replace a M.I.N.D.A. sensor (MINI)
• How to replace a print fan (MINI)
• How to replace a hotend PTFE tube (MINI/MINI+)
• How to replace a hotend fan (MINI)
• How to replace a heatsink (MINI/MINI+)
• How to replace a heaterblock/heatbreak (MINI/MINI+)
• How to replace a Buddy control board (MINI)
• How to access and clean the extruder-pulley (MINI/MINI+)
• How to update firmware (MINI/MINI+)
• How to replace a print head PTFE tube (MINI/MINI+)
• How to replace a heatbed thermistor (MINI/MINI+)
• How to replace a hotend thermistor (MINI/MINI+)
• Height adjustment of M.I.N.D.A./SuperPINDA sensor (MINI/+)
  1. Begin assembly
  2. Introduction
  3. Preparing the printer
  4. M.I.N.D.A./SuperPINDA height adjustment
  5. First layer calibration
• How to replace a hotend heater (MINI/MINI+)
• How to replace a heatbed (MINI/MINI+)
• How to replace an extruder motor (MINI/MINI+)
• How to replace SuperPINDA (MINI/MINI+)
• How to replace bearings on the X-axis (MINI/MINI+)
• How to replace bearings on the Y-axis (MINI/MINI+)
• How to replace a heatbed set (MINI/MINI+)
• How to post-process the printed parts
• How to trim PTFE tube - Original Prusa printers
• Replacing the PEI sheet on the (MK3S/MK3/MK2.5S/MK2.5)