1. Tool necessary for this chapter

CORE One conversion kit (1.01)

• 1A. Introduction
• 1B. MK4S Inspection
• 1C. Printer Disassembly
• 1D. Component Prep
• 2. Base assembly
• 3. Back assembly
• 4. Heatbed assembly
• 5. CoreXY assembly
• 6. Nextruder assembly
  1. Tool necessary for this chapter
  2. Mounting the Nextruder: parts preparation
  3. Protecting the heatbed
  4. Mounting the Nextruder
  5. Heatsink fan: parts preparation
  6. Installing the heatsink fan
  7. Guiding the heatsink fan cables
  8. LoveBoard: parts preparation I.
  9. LoveBoard: parts preparation II.
  10. Assembling the Loveboard-mount
  11. Assembling the Printhead-cover
  12. Assembling the LoveBoard
  13. Guiding the main cable
  14. Covering the LoveBoard
  15. Swingarm: parts preparation I.
  16. Swingarm: parts preparation II.
  17. Guiding the main cable
  18. Mounting the main cable
  19. Attaching the LoveBoard assembly
  20. Mounting the swingarm
  21. Attaching the main cable
  22. Inserting the PTFE tube
  23. Securing the PTFE tube
  24. Checking the movement
  25. Print fan: parts preparation
  26. Assembling the fan-shroud
  27. Installing the print fan assembly
  28. Hotend: parts preparation
  29. Installing the hotend
  30. Connecting the heatsink cables
  31. Connecting the hotend cables
  32. Connecting the print fan cable
  33. Connect E-motor cable
  34. LoveBoard covers: parts preparation
  35. LoveBoard: Wiring check
  36. Covering the LoveBoard
  37. Guiding the main cable
  38. Haribo time
  39. Done
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Calibration & First run
• Manual changelog