English

Prusa Research a.s.

Prusa Research a.s.

Support
Prusa CORE One
CORE One conversion kit (1.00)
2. Base assembly | Tools necessary for this chapter

1. Tools necessary for this chapter

Step 1 of 21 (Chapter 5 of 13)

Contents

Comments

⬢For this chapter, please prepare:

⬢Wrench 13-16

⬢2.5mm Allen key

⬢T10 torx key / T10 torx screwdriver

Loading...

Contents

CORE One conversion kit (1.00)

1A. Introduction
1B. MK4S Inspection
1C. Printer Disassembly
1D. Component Prep
2. Base assembly
1. Tools necessary for this chapter
2. Base assembly: parts preparation
3. Inserting the zip ties
4. Base assembly: parts preparation
5. Installing the motor mounts
6. Installing the rear motor
7. Securing the rear motor
8. Installing the front motor right
9. Installing the front motor left
10. Bottom frame: parts preparation
11. Assembling the bottom profile: front + left
12. Assembling the bottom profile: left + rear
13. Assembling the bottom profile: right
14. Inserting the spacer pins
15. Anti-vibration feet: parts preparation
16. Installing the anti-vibration feet
17. Installing the bottom frame
18. Mounting the bottom frame: right side
19. Mounting the bottom frame: rear + left + front
20. Haribo time
21. Done
3. Back assembly
4. Heatbed assembly
5. CoreXY assembly
6. Nextruder assembly
7. Bodywork & Electronics
8. Trim, Door & xLCD
9. Calibration & First run
Manual changelog

Comments

Log in to post a comment

No comments