1. Begin assembly

Printer maintenance

• How to replace a blower fan (SL1)
• How to replace an optical sensor (SL1)
• How to replace the print display (SL1)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this chapter
  4. Preparing the printer
  5. Removing the cover
  6. Disconnecting the print display
  7. Removing the print display
  8. New print display - parts preparation
  9. Installing the new print display
  10. Fixing the display in place
  11. Connecting the print display
  12. Connecting the power button
  13. Assembling the cover
  14. Calibrating the new display - preparation
  15. Calibrating the new display - Booting up the printer
  16. Initiating the calibration process
  17. Removing the tank and testing the display
  18. Placing the UV meter and connect it to the printer
  19. Calibration process
  20. Applying the calibration results
  21. Finished!
• How to replace the power button (SL1/SL1S)
• How to replace the A64 board (SL1)
• How to replace the USB connector (SL1/SL1S)
• How to post-process the printed parts
• How to replace a UV LED assembly (SL1)
• How to replace a filter (SL1/SL1S)