1. Tools necessary for this chapter

Rozpakowanie i pierwsze uruchomienie Prusa CORE One L+ (1.0)

• 1. Introduction
• 2. Unpacking the printer
• 3. Preparing the printer [Tłumaczenie w toku]
  1. Tools necessary for this chapter
  2. Removing the protective films
  3. Removing the X-axis protection
  4. Preparing the LCD panel (part 1)
  5. Preparing the LCD panel (part 2)
  6. Removing the LCD panel protection
  7. Attaching the LCD panel
  8. Removing the heatbed screws
  9. Attaching the Buddy3D camera
  10. Attaching the spool holder
• 4. First run