JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Splitting STL with single compact part

Menu

Splitting STL with single compact part

Splitting STL with single compact part
Relevant for:
MMU1MMU2S
Last updated 4 years ago
Splitting STL with single compact part
 Difficulty
Moderate
 Steps
7
 Available languages
ENCSPLESDEITFR

Step 1 Choose Select tool and paint the area you want to separate.

Choose Select tool and paint the area you want to separate.
Choose Select tool and paint the area you want to separate.
Choose Select tool and paint the area you want to separate.
⬢In our case the helmet. (Note: Do not double click on the model. That would select the whole part)

Software used in this tutorial is Autodesk Meshmixer.

You can download Meshmixer at: meshmixer.com/download.html
⬢If you are using Fusion 360, you can download MeshMixer from there.  In DESIGN workspace, visit the TOOLS tab, go to MAKE, 3D Print, select MeshMixer as a Print Utility and hit Download.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us