1. 組み立てを始める

プリンターメンテナンス

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L) [進行中の翻訳]
  1. 組み立てを始める
  2. Introduction
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend fan cable
  9. Disconnecting the hotend cables
  10. Print fan removal
  11. Print fan parts preparation
  12. Attaching the print fan
  13. Attaching the Printhead-cover-left
  14. Attaching the printer top cover
  15. Turning the printer on
  16. Final check
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)