1. 組み立てを始める

プリンターメンテナンス

• How to replace the main cable (CORE One/+)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace Z motors (CORE One)
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• Xモーター／Yモーターの交換方法（CORE One）
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One) [進行中の翻訳]
  1. 組み立てを始める
  2. Introduction
  3. Tools necessary for this guide
  4. Printer Preparation
  5. Tensioner Pulley Info
  6. Tensioner Pulley Removal
  7. Pulley Assembly Disassembly
  8. Belt-Tensioner-Pulley Preparation
  9. Tensioner Preparation
  10. Pulley Assembly
  11. Tensioning Bolt Lubrication
  12. Tensioner Installation
  13. Belt Tensioning
  14. Finish
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)