1. 組み立てを始める

プリンターメンテナンス

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L) [進行中の翻訳]
  1. 組み立てを始める
  2. Introduction
  3. Tools necessary for this guide
  4. Preparing the printer (part 1)
  5. Preparing the printer (part 2)
  6. Protecting the heatbed
  7. Removing the side panel
  8. Disassembling the filament sensor
  9. Removing the filament sensor
  10. Parts preparation: IR filament sensor
  11. Connecting the IR filament sensor
  12. Installing the IR filament sensor
  13. Mounting the filament sensor
  14. Re-attaching the side cover
  15. Testing the filament sensor (Part 1)
  16. Testing the filament sensor (Part 2)
  17. Well done!
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)