EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Manual changelog MK3S+ kit

Manual changelog MK3S+ kit

Manual changelog MK3S+ kit
Relevant for:
Last updated 7 months ago
Manual changelog MK3S+ kit
 Difficulty
Very easy
 Steps
6
 Available languages
CSDEESFRITJAPL

Step 1 Versions history

Versions history
Versions history
Versions of the MK3S+ manual:
11/2020 - Initial version 3.20
01/2021 - Updated to version 3.21
02/2021 - Updated to version 3.22
09/2021 - Updated to version 3.23
11/2021 - Updated to version 3.24
12/2021 - Updated to version 3.25

Step 2 Changes to the manual (1)

Changes to the manual (1)
Changes to the manual (1)
Changes to the manual (1)
11/2020 - Y-axis assembly
The screw length has been changed. Current size M3x12.
11/2020 - Electronics assembly
Added description of the hotend heater cable connection, which was missing in the previous version.
Manual version 3.21

Step 3 Changes to the manual (2)

Changes to the manual (2)
Changes to the manual (2)
Changes to the manual (2)
02/2021 - Y-axis assembly
New orientation of the X-axis bearings.
Added instructions of the proper hotend thermistor cable guidance.
Manual version 3.22

Step 5 Changes to the manual (4)

Changes to the manual (4)
Changes to the manual (4)
11/2021 - Electronics assembly
New kit units are shipped with a silver label already affixed to the frame.
Manual version 3.24

Step 6 Changes to the manual (5)

Changes to the manual (5)
Changes to the manual (5)
12/2021 - E-axis assembly
New kits are supplied with a hotend fan from another vendor. Added instructions for this version of the hotend fan.
Manual version 3.25
Was this guide helpful?
This action is available only to registered users. Please log-in.

Comments

Please sign in before adding a comment.
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.