1. Versions history

Original Prusa Enclosure assembly (external display mounting) (v1.03)

• 1. Introduction
• 2A. Preparing the printer (MK4/S & 3.9/S)
• 2B. Preparing the printer (MK3S+ Black PSU)
• 2C. Preparing the printer (MK3S+ Silver PSU)
• 3. Assembling the enclosure
• 4A. Installing the printer (MK4/S & 3.9/S)
• 4B. Installing the printer (MK3S+ Black PSU)
• 4C. Installing the printer (MK3S+ Silver PSU)
• Manual changelog Enclosure kit
  1. Versions history
  2. Changes to the manual (1)
  3. Changes to the manual (2)
  4. Changes to the manual (3)
  5. Changes to the manual (4)
• 5. Fire Suppression System (add-on)
• 6. Hinged Lid (add-on)
• 6A. Hinged Lid with MMU3
• 6B. Hinged lid with MMU2S
• 7. Advanced filtration system (add-on)
• 8. Mechanical lock (add-on)
• 9. Quick release PSU cable - MK3S+ Black PSU (add-on)
• 10. Quick release PSU cable - MK4/3.9 Black PSU (add-on)
• 11. White LED strip (add-on)