1. Begin assembly

Printer maintenance

• How to replace a heatbreak/heatsink/heaterblock (MK3S+/MK3S/MK2.5S/MMU2S)
• How to trim PTFE tube - Multi Material
• How to post-process the printed parts
• How to replace a heatbed thermistor (MK3S+/MK3S/MK2.5S/MK2S)
  1. Begin assembly
  2. Getting the replacement set
  3. Tools necessary for this guide
  4. Getting the printer ready
  5. Disconnecting the heatbed MK3S+/MK3S/MK3
  6. Disconnecting the heatbed MK2.5S/MK2.5/MK2S
  7. Removing the heatbed MK3S+/MK3S/MK3
  8. Removing the heatbed MK2.5S/MK2.5/MK2S
  9. Removing the cover and sleeve/wrap
  10. Preparing the replacement set
  11. Preparing the heatbed and thermistor
  12. Fixing the thermistor in place
  13. Fixing the thermistor in place
  14. Reassembling the heatbed
  15. Connecting the heatbed MK3S/MK3
  16. Connecting the heatbed MK2.5S/MK2.5/MK2S
  17. Final check
• How to replace a hotend PTFE tube (MK3S+/MK3S/MK2.5S/MMU2S)
• How to replace a hotend thermistor (MK2S)
• How to trim PTFE tube - Original Prusa printers
• Replacing the PEI sheet on the (MK3S/MK3/MK2.5S/MK2.5)