English
1. Tools necessary for this chapter
Step 1 of 25 (Chapter 3 of 8)
Contents
Comments
⬢For this chapter, please prepare:
⬢2.5mm Allen key
⬢Torx key T8/10
Loading...
Contents
Original Prusa MK4/MK3.9 to MK4S/MK3.9S upgrade
- 1. Introduction
- 2. Upgrading the Y-axis
- 3. Upgrading the xLCD
- Tools necessary for this chapter
- Removing the xLCD assembly
- Disassembling the xLCD
- MK4: xLCD versions
- xLCD A: parts preparation (part 1)
- xLCD A: parts preparation (part 2)
- Installing the xReflector sticker (xLCD A)
- Covering the xLCD (xLCD A)
- Installing the PE/FE Faston (xLCD A)
- Attaching the knob (xLCD A)
- Connecting the assembly (xLCD A)
- Mounting the assembly (xLCD A)
- What's left... (xLCD A)
- xLCD B
- xLCD B: parts preparation (part 1)
- xLCD B: parts preparation (part 2)
- Installing the xReflector sticker (xLCD B)
- Installing the M3n nut (xLCD B)
- xLCD-support assembly (xLCD B)
- xLCD-support-left assembly (xLCD B)
- Attaching the knob (xLCD B)
- Connecting the assembly (xLCD B)
- Attaching the assembly (xLCD B)
- Haribo time!
- Well...
- 4. Upgrading the Nextruder
- 4B. Upgrading the Nextruder (MMU3)
- 5. Upgrading the connectivity
- 6. Preflight check
- Manual changelog
Comments
Log in to post a comment
Xefan
•
Provided parts don't fit the official enclosure - it blocks the doors. Absolute joke.
Reply
Colecago
•
If you have the old LCD and don't care about an "S" added to your bezel skip this section entirely. Not worth the time.
Reply
Roy
•
Read through this chapter and decide if you want to proceed before starting. This was a non-upgrade and the last step is really flawed.
Reply
willandbeyond
•
Important clarification: skip 3.1-3.23, resume at 3.24.
Reply
Collin Barker
•
Just skip this step and print an orange s. It will look better and save so much time. Abs while durable when injection molded looks cheap
Reply