English
Login
Prusa Research a.s.
Prusa Research a.s.

1. Tools necessary for this chapter

Step 1 of 29 (Chapter 3 of 18)
Contents
Comments
⬢For the following steps, please prepare:
⬢2.5mm Allen key
⬢Needle-nose pliers for cutting zip ties
⬢Piece of cloth or fabric (at least 15x15 cm)  for covering the heatbed

Contents

Original Prusa Enclosure assembly (external display mounting) (v1.03)

Comments

Log in  to post a comment
Formica
•
Check to make sure you have the LCD holder before dissassembling your printer.  If not, you can find the print file at:
 https://www.printables.com/model/251931-enclosure-printable-parts/files
Look under 'LCD support and FS cover section' Your going to want the:
LCD-support-L (MK3S+).stl
and
LCD-support-R (MK3S+).stl
 
 
Reply
Lyude
•
I honestly delayed doing any of this chapter until I finished making the enclosure base. Doing it in that order both lets you print the parts while you assemble the rest of the frame, and additionally gives you a backup in case you break one of the plastic parts and happen to have PETG filament on hand.
Reply