⬢Turn the printer so that the front side is facing you.
⬢It is highly recommended to place a soft protective layer (e.g., bubble wrap) on the heatbed.
⬢Then place an empty cardboard box on top of it.
⬢Pull the first tool (from the left) out to the left to release it.
⬢Place the released tool on the cardboard box.
Check whether your toolhead has the older black PETG idler or the newer gray PCCF idler. To safely use the full high-temperature capabilities of the XL+, the gray PCCF idler is required. If your printer still has the black PETG version, contact our support via live chat at prusa3d.com or email [email protected] to arrange a replacement.
Contents
Prusa XL to Prusa XL+ upgrade (Dual-Head, Five-Head) (1.00)
