1. Introduction
Step 1 of 19 (Chapter 1 of 3)
Contents
Comments
⬢In this guide, we will be upgrading the MK4S MMU3 setup into CORE One MMU3.
⬢MMU3 installation requires extruder modifications. However, we need to make a few other adjustments before proceeding with that.
⬢Let's quickly review the key points we'll cover in this guide:
Contents
Original Prusa MK4S MMU3 to CORE One MMU3 Conversion (1.00)
- 1. Conversion
- Introduction
- Conversion Printable parts INFO
- MMU3 Version Check
- Buffer Check
- PTFE tubes disconnecting
- PTFE tube disconnecting 2
- xBuddy box opening
- Cable Disconnecting
- MMU Removal
- Frame Holders Removal
- Buffer Rebuild
- Plate Holders Preparation
- Magnet Installation
- Buffer Rebuild 2
- Buffer Rebuild 3
- Buffer Rebuild 4
- Buffer Rebuild 5
- Buffer Ready To Roll
- MK4S to CORE One Conversion
- 10D. CORE One Setup and Calibration
- 11. First Flight
Comments
Log in to post a comment
Dimbulb
•
no gummy bears in the kit?
Reply