1. Comenzar el montaje

Mantenimiento de la impresora

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace the Buddy3D camera cable (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace the White LED strip (CORE One L) [Traducción en desarrollo]
  1. Comenzar el montaje
  2. Introduction
  3. Tools necessary for this guide
  4. Preparing the printer
  5. Disconnecting the camera
  6. Retirando el panel de la puerta.
  7. Removing the plexiglass cover
  8. Removing the metal side cover
  9. Protecting the heatbed
  10. Accessing the corner profile screw
  11. Removing the corner profile (Part 1)
  12. Removing the corner profile (Part 2)
  13. Reattaching the LCD panel
  14. Removing the LED panel
  15. Accessing the cables (part 1)
  16. Accessing the cables (part 2)
  17. Removing the Wi-Fi module
  18. Retirando las cubiertas de la electrónica
  19. Disconnecting the cables
  20. Desconectando los cables de la fuente de alimentación
  21. Checking the cables
  22. Removing the heatbed cables
  23. Detaching the back panel
  24. Removing the back panel (part 1)
  25. Removing the back panel (part 2)
  26. Removing the back panel (part 3)
  27. Removing the cable clamps
  28. Removing the LED cable
  29. Removing the old LED strip
  30. Parts preparation: White LED strip 300 mm
  31. Attaching the new LED strip
  32. Attaching the new LED cable
  33. Reattaching the back panel (part 1)
  34. Reattaching the back panel (part 2)
  35. Reattaching the back panel (part 3)
  36. Reconnecting the xBuddy power cables
  37. Reconnecting the main FE cable
  38. Reattaching the heatbed cables
  39. Reconnecting the cables (part 1)
  40. Reconnecting the cables (part 2)
  41. Checking the cable length
  42. Covering the electronics
  43. Reattaching the Wi-Fi module
  44. Reattaching the cable clamps (part 1)
  45. Reattaching the cable clamps (part 2)
  46. Reattaching the LED and the door sensor
  47. Reattaching the corner profile
  48. Reattaching the LCD panel
  49. Attaching the side panel
  50. Coloca el panel de la puerta.
  51. Testing the new White LED strip
  52. Well done