Menu

Colour bleeding

Colour bleeding
Relevante para :
Ultima actualización 2 years ago
Colour bleeding
 Dificultad
Moderada
 Pasos
3
 Idiomas disponibles
EN

Paso 1 Issue description

Issue description
Issue description
This guide is obsolete. For more info on this topic, please see Volúmenes de purga.
Issue is well known that it leaves traces of previously used colour in each layer as you can see in the picture.
For some filaments or color combinations ( such as black color together with white color ) additional wipe area might be needed. The default value works with most materials and color combinations.

Paso 2 Fix (newer version)

Fix (newer version)
Fix (newer version)
Fix (newer version)
For this step you need Slic3r PE 1.35.1 or newer. Software is part of drivers package prusa3d.com/drivers/
Open Slic3r PE with your model and switch to tab "Print Settings".
Increase the value "Per color change depth" by few millimeters.
Process the G-code again and save it on your SD Card.
Please keep in mind that increasing wipe width causes longer print times and higher material consumption.

Paso 3 Fix (older version)

Fix (older version)
Fix (older version)
Fix (older version)
This step is no longer needed if you have installed Slic3r PE 1.35.1 or newer.
Turn on "Advanced mode" by checking highlighted box.
Increase "Width of wipe" by few millimeters.
Process the G-code again.
Please keep in mind that increasing wipe width causes longer print times and higher material consumption.
¿Fue útil esta guía?

Comentarios

Debes iniciar sesión antes de agregar un comentario.
¿Todavía tienes preguntas?

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a info@prusa3d.com o mediante el botón que hay más abajo.