1. Comenzar el montaje

Mantenimiento de la impresora

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L) [Traducción en desarrollo]
  1. Comenzar el montaje
  2. Introduction
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend cables
  9. Disconnecting the hotend cables
  10. Removing the hotend assembly
  11. Removing the nozzle
  12. New nozzle parts preparation
  13. Installing the new nozzle
  14. Reattaching the silicone sock
  15. Inserting the hotend
  16. Checking the new nozzle
  17. Connecting the hotend cables
  18. Guiding the hotend cables
  19. Attaching the Prinhead-cover-left
  20. Attaching the printer top cover
  21. Turning the printer on
  22. Nozzle set up
  23. Final check
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)