ES
  • English
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Iniciar sesión

Toolhead status LED explained (XL)

Relevante para :
Ultima actualización 5 months ago
Este artículo está también disponible en los siguientes idiomas: 
ENPLDEITFRJA

Each XL toolhead is equipped with a Dwarf board, and a status LED with several possible colors. Below is an explanation of the meaning of each color. 

Blue

The Dwarf is in a "bootloader", inactive state. It is not communicating yet with the main XLBuddy board, but is waiting for communication to be established, either finishing start-up or finishing a firmware upgrade. 

Green

The Dwarf is in a regular, but inactive state. The application on the Dwarf is running, communicating with the main XLBuddy board. 

White

The tool is in an active state. Only one tool can be active at a given moment. 

Yellow

Regularly, a tool can be either picked or parked. A yellow LED indicates that the tool is neither picked nor parked. This status typically indicates mechanical or electrical problems with a wrongly parked or picked tool. 

Red

The tool has an error, its application crashed. It is possible that an error on this would propagate to the main XLBuddy board, rendering the status Blue

¿Fue útil este artículo?

Comentarios

¿Todavía tienes preguntas?

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.

Contacta con nosotros