1. Tools necessary for this chapter

Original Prusa i3 MK3S kit assembly (v3.15)

• 1. Introduction
• 2. Y-axis assembly
• 3. X-axis assembly
• 4. Z-axis assembly
• 5. E-axis assembly
• 6. LCD assembly
  1. Tools necessary for this chapter
  2. Preparing the LCD parts
  3. Checking the LCD cables
  4. Assembling the LCD supports
  5. Assembling the LCD-cover
  6. Securing the LCD controller
  7. Preparing the supports for assembly
  8. Mounting the LCD display onto the printer
  9. Assembling the LCD knob
  10. Haribo time!
  11. LCD is done!
  12. Different PSU types
• 7. Heatbed & PSU assembly (Black PSU)
• 7. Heatbed & PSU assembly (Silver PSU)
• 8. Electronics assembly
• 9. Preflight check
• Manual changelog