EN
    Login

    1. Introduction

    Menu

    1. Introduction

    1. Introduction
    Relevant for:
    MK2S
    Last updated 4 years ago
    1. Introduction
     Difficulty
    Very easy
     Steps
    8
     Available languages

    Step 1 Original Prusa i3 MK2 vs MK2S

    Original Prusa i3 MK2 vs MK2S
    Original Prusa i3 MK2 vs MK2S
    ⬢Take a look at the aluminium frame (Z-axis), there is a sticker with the name of the printer. In case of a text "Original Prusa i3 MK2S" you need to use another version of this manual - Original Prusa i3 MK2S kit assembly
    ⬢If your sticker contains "Original Prusa i3 MK2" you can continue using this manual.

    Step 3 Labels guide

    Labels guide
    Labels guide
    ⬢All the boxes and bags including parts for build are labeled.
    ⬢Number (or numbers) in the header tells you for which chapter you'll need that bag (or box).

    Step 4 Critical parts include spares back-up

    Critical parts include spares back-up
    Critical parts include spares back-up
    ⬢Critical parts, like zipties, have a spare included as a back-up option. How much we included as spare is written in the bracket.
    ⬢No need to worry if you mess up during the assembly with the extras added.

    Step 6 Spare bag

    Spare bag
    Spare bag
    ⬢Every type of fastener is included in a separate special bag.
    If you lose a screw when building, use one from this bag.

    Step 7 Nut insertion tip

    Nut insertion tip
    Nut insertion tip
    Nut insertion tip
    Nut insertion tip
    If you're experiencing troubles with getting nuts into correct places, just follow these simple steps.
    ⬢Screw M3 nut a bit on some long screw (M3x40 from Extruder bag works in most cases).
    ⬢Push the screw with the nut into the hole where it is supposed to be.
    ⬢Grab the screw with pliers and gently hammer the nut in place using a wrench.
    If you use a screw from a different bag then you are using at the moment, don't forget to return it back into the bag.
    Was this guide helpful?

    Comments

    Still have questions?

    Still have questions?

    If you have a question about something that isn't covered here, check out our additional resources.
    And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

    Contact us