1. Introduction

Original Prusa Enclosure [進行中の翻訳] (v1.03)

• 1. Introduction
• 2A. Preparing the printer (MK4/S & 3.9/S)
• 2B. Preparing the printer (MK3S+ Black PSU)
• 2C. Preparing the printer (MK3S+ Silver PSU)
• 3. Assembling the enclosure
• 4A. Installing the printer (MK4/S & 3.9/S)
• 4B. Installing the printer (MK3S+ Black PSU)
• 4C. Installing the printer (MK3S+ Silver PSU)
• Manual changelog Enclosure kit
• Fire Suppression System (add-on)
• Hinged Lid (add-on)
• Hinged Lid with MMU3
• Hinged lid with MMU2S [進行中の翻訳]
  1. Introduction
  2. Removing the LCD
  3. Removing the filament guide
  4. Removing the printer
  5. Removing the printer
  6. Installing the MMU2S
  7. Preparing the printer (MK3S+ with MMU2S)
  8. Installing the printer
  9. Installing the PSU
  10. Adjusting the printer
  11. Mounting the LCD: parts preparation
  12. Mounting the LCD
  13. Assembling the grommets: parts preparation
  14. Assembling the MMU-grommets
  15. Mounting the MMU-grommets
  16. Mounting the MMU-grommets
  17. Mounting the MMU-grommets (optional)
  18. Guiding the PTFE tubes
  19. Assembling the buffer feet: parts preparation
  20. Assembling the buffer feet
  21. Mounting the buffer feet
  22. Mounting the buffer feet
  23. Joining the buffer
  24. That's it!
• Advanced filtration system (add-on)
• Mechanical lock (add-on)
• Quick release PSU cable - MK3S+ Black PSU (add-on)
• Quick release PSU cable - MK4/3.9 Black PSU (add-on)
• White LED strip (add-on)