1. Introduction

Original Prusa Enclosure [進行中の翻訳] (v1.03)

• 1. Introduction
• 2A. Preparing the printer (MK4/S & 3.9/S)
• 2B. Preparing the printer (MK3S+ Black PSU)
• 2C. Preparing the printer (MK3S+ Silver PSU)
• 3. Assembling the enclosure
• 4A. Installing the printer (MK4/S & 3.9/S)
• 4B. Installing the printer (MK3S+ Black PSU)
• 4C. Installing the printer (MK3S+ Silver PSU)
• Manual changelog Enclosure kit
• Fire Suppression System (add-on)
• Hinged Lid (add-on)
• Hinged Lid with MMU3
• Hinged lid with MMU2S
• Advanced filtration system (add-on)
• Mechanical lock (add-on) [進行中の翻訳]
  1. Introduction
  2. Tools necessary for this chapter
  3. Removing the door panel
  4. Disassembling the door panel
  5. Assembling the lock insert: parts preparation
  6. Assembling the lock housing
  7. Assembling the door holders: parts preparation
  8. Assembling the door holders
  9. Mounting the Lock Door Holders
  10. Assembling the lock mechanism: parts preparation
  11. Assembling the lock mechanism
  12. Assembling the lock mechanism
  13. Mounting the rods: parts preparation
  14. Mounting the rods
  15. Mounting the rods
  16. Mounting the rods
  17. Mounting the rods
  18. Covering the lock mechanism: parts preparation
  19. Covering the lock mechanism
  20. Installing the rod latches: parts preparation
  21. Installing the rod latches
  22. Attaching the door panel
  23. That's it!
• Quick release PSU cable - MK3S+ Black PSU (add-on)
• Quick release PSU cable - MK4/3.9 Black PSU (add-on)
• White LED strip (add-on)