1. 組み立てを始める

プリンターメンテナンス

• How to replace the main cable (CORE One/+) [進行中の翻訳]
  1. 組み立てを始める
  2. Introduction
  3. Tools necessary for this guide
  4. Moving the Z-axis
  5. Unloading filament
  6. Preparing the printer
  7. Top Cover Removal
  8. Removing the door
  9. Accessing the LoveBoard
  10. Disconnecting the hotend
  11. Disconnecting the fan cables
  12. プリントファンを取り外す
  13. リアカバーの取り外し
  14. Disconnecting the main cable
  15. Releasing the main cable
  16. Accessing the electronics
  17. Accessing the buddy board
  18. Unplugging the main cable
  19. Pushing the main cable inside
  20. Removing the Main-cable-clip
  21. Main cable: parts preparation
  22. メインケーブルの取り付け
  23. Plugging in the main cable
  24. Attaching the rear cover
  25. Mounting the print fan
  26. ネクストルーダーケーブルの接続
  27. Covering the LoveBoard
  28. Leading the main cable
  29. Connecting the main cable
  30. Covering the xBuddy board
  31. Covering the cables
  32. Attaching the cable ties I.
  33. Attaching the cable ties II.
  34. Attaching the main cable clip
  35. Turning the printer ON
  36. Final check
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace Z motors (CORE One)
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• Xモーター／Yモーターの交換方法（CORE One）
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)