1. Printer preparation

Prusa XL to Prusa XL+ upgrade [進行中の翻訳] (1.00)

• 1. Introduction
• 2. Toolhead upgrade
• 3. Heatbed upgrade
• 4. Printed parts and back cover upgrade [進行中の翻訳]
  1. Printer preparation
  2. Releasing the belts
  3. CAUTION: Lubricant Handling
  4. X-carriage cover removing
  5. Belt clamps removing
  6. Belts removing
  7. Removing the side metal plates
  8. Removing CoreXY front parts
  9. Disassembling the CoreXY front left assembly
  10. Disassembling the CoreXY front right assembly
  11. New CoreXY tensioner assembly: parts preparation
  12. Assembling the new CoreXY tensioner
  13. New CoreXY front left: parts preparation
  14. Assembling the new CoreXY front left
  15. Installing the CoreXY front left
  16. New CoreXY front right: parts preparation
  17. Assembling the new CoreXY front right
  18. Installing the CoreXY front right
  19. Uncovering the electronics I.
  20. Disassembling the cover
  21. Uncovering the electronics II.
  22. Uncovering the electronics III.
  23. Uncovering the electronics IV.
  24. Freeing the cables: left side
  25. Removing the LED bar
  26. Removing the CoreXY back right assembly
  27. Dissasembling the CoreXY back right
  28. Spacers removing
  29. New CoreXY back right bottom: parts preparation
  30. Assembling the CoreXY back right bottom
  31. New CoreXY back right top: parts preparation
  32. Assembling the CoreXY back right top
  33. Assembling the CoreXY back right
  34. Installing the CoreXY back right
  35. Disassembling the XY motor pulley
  36. New motor pulley: parts preparation
  37. Assembling the new motor pulley
  38. Installing the new motor
  39. Installing the LED bar
  40. Securing the cables
  41. Freeing the cables: right side
  42. Removing the LED bar
  43. Removing the CoreXY back left assembly
  44. Dissasembling the CoreXY back left
  45. Spacers removing
  46. New CoreXY back left bottom: parts preparation
  47. Assembling the CoreXY back left bottom
  48. New CoreXY back left top: parts preparation
  49. Assembling the CoreXY back left top
  50. Assembling the CoreXY back left
  51. Installing the CoreXY back left
  52. Disassembling the XY motor pulley
  53. New motor pulley: parts preparation
  54. Assembling the new motor pulley
  55. Installing the new motor
  56. Installing the LED bar
  57. Securing the cables
  58. Side metal covers: parts preparation
  59. Installing the side metal covers
  60. Removing upper back cover clips
  61. New upper back cover clips: parts preparation
  62. Installing the new upper back cover clips
  63. Back cover: parts preparation
  64. Back cover attaching I.
  65. Back cover attaching II.
  66. New electronics cover: parts preparation
  67. Assembling the new cover
  68. XL buddy fan: parts preparation
  69. Installing the XL buddy fan
  70. XL buddy heatsink: parts preparation
  71. Installing the heatsink
  72. Connecting the XL buddy fan
  73. Connecting the XL buddy board
  74. Covering the electronics
  75. New PSU cable covers: parts preparation
  76. Replacing the PSU cable covers
  77. Removing the old bed energy chain mount
  78. New bed energy chain mount: parts preparation
  79. Installing the new bed energy chain mount
  80. Removing the frame front cover
  81. New frame front cover: parts preparation
  82. Installing the new right frame front cover
  83. Installing the new left frame front cover
  84. New cover clips: parts preparation
  85. Removing the cover clip
  86. Installing the new cover clip
  87. Replacing the cover clips I.
  88. Replacing the cover clips II.
  89. Adjusting the heatbed
  90. Replacing the cover clips III.
  91. Removing the Z axis bearing housing
  92. New Z axis bearing housing: parts preparation
  93. Installing the new Z axis bearing housing I.
  94. Installing the new Z axis bearing housing II.
  95. Removing the frame energy chain mount
  96. New frame energy chain mount: parts preparation
  97. Installing the new energy chain mount
  98. It's done
• 5. Belts and spool holder upgrade
• 6. Finishing up
• Manual changelog