1. Tools necessary for this chapter

Prusa CORE One+ コンバージョンキット

• 1A. Introduction
• 1B. MK4S Inspection
• 1C. Printer Disassembly
• 1D. Component Prep
• 2. Base assembly
• 3. Back assembly [進行中の翻訳]
  1. Tools necessary for this chapter
  2. xBuddy: parts preparation I.
  3. xBuddy: parts preparation II.
  4. Applying the thermal pads
  5. Installing the xBuddy
  6. Installing the xBuddy extension
  7. Installing zip ties
  8. Connecting the xBuddy extension board
  9. Inserting grommets: xBuddy box
  10. Wi-Fi: parts preparation
  11. Assembling the Wi-Fi
  12. Installing the Wi-Fi assembly
  13. PSU assembly: parts preparation
  14. Preparing the PSU
  15. Power cables info
  16. Connecting the PSU
  17. Back panel: parts preparation
  18. Installing grommets: back panel top
  19. Installing grommets: sides
  20. Aligning the PSU
  21. Mounting the PSU
  22. Aligning the xBuddy box assembly
  23. Mounting the xBuddy box
  24. PSU-cable-cover: parts preparation
  25. Preparing the PSU-cable-cover
  26. PSU-cable-cover installation
  27. Chamber fans: parts preparation
  28. Assembling the fan grid
  29. Attaching the fans
  30. Covering the cooling fans
  31. Rear profiles: parts preparation
  32. Installing the rear profiles
  33. Mounting the back panel
  34. Securing the Back panel
  35. Power Terminal Screws Preparation
  36. Connecting the power cables
  37. Stepper splitter: parts preparation
  38. Guiding the Stepper splitter cable
  39. Connecting the Stepper splitter
  40. Mounting the Stepper Splitter
  41. LCD cable: parts preparation
  42. Guiding the LCD cable
  43. Main FE cable INFO
  44. Connecting the FE cable (no 3.)
  45. Guiding the FE cable (no. 2)
  46. Guiding the FE cable (no. 1)
  47. Guiding the FE cable (no. 4 and 5)
  48. Cable Bundle Cleanup
  49. FE cable - xBuddy: parts preparation
  50. Connecting the FE cable: xBuddy
  51. Plugging the xLCD cable
  52. PSU-cover: parts preparation
  53. Connecting the FE cable: PSU
  54. Haribo time
  55. Done
• 4. Heatbed assembly
• 5. CoreXY assembly
• 6. Nextruder assembly
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Calibration & First run
• Manual changelog