1. Tools necessary for this chapter

Original Prusa Enclosure [進行中の翻訳] (v1.03)

• 1. Introduction
• 2A. Preparing the printer (MK4/S & 3.9/S)
• 2B. Preparing the printer (MK3S+ Black PSU)
• 2C. Preparing the printer (MK3S+ Silver PSU)
• 3. Assembling the enclosure [進行中の翻訳]
  1. Tools necessary for this chapter
  2. LONG vs SHORT profile
  3. Assembling the base frame: parts preparation
  4. Assembling the base frame
  5. Assembling the base frame
  6. Assembling the feet: parts preparation
  7. Feet bracket installation
  8. Assembling the feet
  9. Attaching the anti-vibration pads
  10. Assembling the bottom panel: parts preparation
  11. Assembling the bottom panel
  12. Securing the bottom panel
  13. Installing the anti-slip dampers: parts preparation
  14. Preparing the anti-slip dampers
  15. Mounting the anti-slip dampers
  16. Assembling the supports: parts preparation
  17. Assembling the supports
  18. Assembling the supports
  19. Assembling the top frame: parts preparation
  20. Assembling the top frame
  21. Assembling the top frame
  22. Assembling the top panel: parts preparation
  23. Preparing the top panel
  24. Assembling the top panel
  25. Installing the PSU-locks: parts preparation
  26. Installing the PSU-locks
  27. Mounting the PSU-locks
  28. Assembling the hinges: parts preparation
  29. Assembling the hinges
  30. Mounting the hinges
  31. Mounting the hinges
  32. Assembling the back panel: parts preparation
  33. Assembling the back panel
  34. Assembling the back panel
  35. Assembling the side panel (right): parts preparation
  36. Assembling the side panel (right):
  37. Assembling the side panel (left): parts preparation
  38. Assembling the side panel (left)
  39. Haribo time!
  40. Well done!
  41. PSU variant for MK3S+
  42. Enclosure + MK4/MK3.9
• 4A. Installing the printer (MK4/S & 3.9/S)
• 4B. Installing the printer (MK3S+ Black PSU)
• 4C. Installing the printer (MK3S+ Silver PSU)
• Manual changelog Enclosure kit
• 5. Fire Suppression System (add-on)
• 6. Hinged Lid (add-on)
• 6A. Hinged Lid with MMU3
• 6B. Hinged lid with MMU2S
• 7. Advanced filtration system (add-on)
• 8. Mechanical lock (add-on)
• 9. Quick release PSU cable - MK3S+ Black PSU (add-on)
• 10. Quick release PSU cable - MK4/3.9 Black PSU (add-on)
• 11. White LED strip (add-on)