日本語
Login
3Dプリンター
マテリアル
部品 & アクセサリー
ソフトウェア
3Dモデル
業界別事例
コミュニティ
ヘルプ
アカデミー
ブログ
会社概要
サポート
Original Prusa XL
Original Prusa XL unpacking (double tool) [進行中の翻訳] (1.07)
3. Printer set up | Tools necessary for this chapter
1. Tools necessary for this chapter
ステップ 1 / 51 (章 3 / 5)
内容
コメント
⬢
For this chapter, please prepare:
⬢
T10 Torx key
⬢
2.5 mm Allen key
⬢
4.0 mm Allen key
⬢
Use a cardboard box as a heatbed protection during the setup. Use one of the Nextruder boxes that you received with your printer.
Loading...
次
内容
Original Prusa XL unpacking (double tool) [進行中の翻訳] (1.07)
1. Introduction
2. Printer unboxing
3. プリンタのセットアップ
Tools necessary for this chapter
Injection molded xLCD: parts preparation
Injection molded xLCD: xLCD cables
Injection molded xLCD: mounting the xLCD
Printed xLCD: parts preparation
古いxLCDアッセンブリのバージョン
Version A: installing the xLCD
Version B: installing the xLCD
Mounting the xLCD
Preparing the printer
Nextruder assembly: parts preparation
Nozzle seal versions
Nozzle seal not pre-installed: nextruder dock preparation
ネクストルーダーケーブルをガイドする
Attaching the first and second nextruder dock
Dock inspection
Dock inspection: video
バージョンC:ノズルシール:部品準備
バージョンC:ノズルシールの組み立て
バージョンC:ネクストルーダーのノズルシール
Guiding the Nextruder PTFE tube
Wi-fi antenna holder versions
Side version: connecting the Nextruder cables
Side version: Installing the Wi-Fi antenna: parts preparation
Side version: Installing the Wi-Fi antenna
Back version: Connecting the Nextruder cables
Back version: Wi-Fi antenna holder: parts preparation
Back version: Installing the Wi-Fi antenna: antenna preparing
Back version: Installing the Wi-Fi antenna: antenna preparing
Back version: Installing the Wi-Fi antena holder
Back version: XL buddy box covering
Back version: Installing the Wi-Fi antenna: parts preparation
Back version: Installing the Wi-Fi antenna
Spoolholder assembly versions
バージョンA:スプールホルダーの組み立て:パーツの準備
バージョンA:スプール・ホルダーの組み立て - ナットの調整
Printed spool holder: assembly
Printed spool holder: Mounting the spool holder
Injection molded spool holder: parts preparation
Injection molded spool holder adjusting the nut
Injection molded spool holder: assembly
Injection molded spool holder: preparing the spool holder
Injection molded spool holder: mounting the spool holder
Nextruder assembly: parts preparation
Docking the Nextruder
Nextruder cable bundle assembly
Nextruder cable bundle assembly versions
Two screws version: Nextruder cable bundle assembly
No screws version: Nextruder cable bundle assembly
Almost done!
Reward yourself
4. First run
Manual changelog XL Dual-Head (Assembled)
コメント
ログイン
してコメントを投稿する
コメントなし