1. Tools necessary for this chapter
ステップ 1 / 36 (章 3 / 4)
内容
コメント
⬢For this chapter, please prepare:
⬢T10 Torx key
You can also use a T10 screwdriver, which is included in the package
⬢2.5 mm Allen key
⬢4.0 mm Allen key
⬢Use a cardboard box as a heatbed protection during the setup. Use one of the Nextruder boxes that you received with your printer.
内容
Prusa XL+ (assembled) [進行中の翻訳] (1.00)
- 1. Introduction
- 2. Printer unboxing
- 3. プリンタのセットアップ
- Tools necessary for this chapter
- Preparing the printer
- ネクストルーダーケーブル：部品の準備
- Guiding the nextruder cable
- Inserting the first nextruder dock
- Attaching the first and second nextruder dock
- Dock inspection
- Dock inspection: video
- Third dock: removing the screw
- Reward yourself
- Wi-Fiアンテナホルダーの取り付け：部品の準備
- Wi-Fiアンテナの取り付け：アンテナの準備
- Wi-Fiアンテナの取り付け：アンテナの準備
- Uncovering the electronics
- Connecting the DWARF cables (1-2)
- Wi-Fiアンテナホルダーの取り付け
- Connecting the DWARF cables (3-5)
- Covering the electronics box
- Guiding the PTFE tubes (1-3)
- Guiding the PTFE tubes (4-5)
- Wi-Fi antenna: parts preparation
- Wi-Fiアンテナの取り付け
- Universal spool holder: parts preparation
- Adjusting the spool holder nut
- Mounting the Puck-universal
- Installing the spoolholder (left side)
- Installing the spoolholder (right side)
- Nextruder assembly: parts preparation
- Docking the Nextruder
- Nextruder cable bundle assembly
- Two screws version: Nextruder cable bundle assembly
- xLCDの組み立て: 部品の準備
- xLCDケーブル を接続します
- Mounting the xLCD
- Reward yourself
- Almost done!
- 4. First run
コメント
ログイン してコメントを投稿する
コメントなし