1. Tools necessary for this chapter

Original Prusa MINI Enclosure (1.0)

• 1. はじめに
• 2. Assembling the Enclosure [進行中の翻訳]
  1. Tools necessary for this chapter
  2. Base & feet: parts preparation
  3. フットブラケットの準備
  4. Attaching the anti-vibration pads
  5. フットブラケットの取り付け
  6. Mounting the foot-brackets
  7. Anti-slip dampers: parts preparation
  8. Preparing the anti-slip dampers
  9. Mounting the anti-slip dampers
  10. Profiles: parts preparation
  11. Installing the profiles
  12. Top panel: parts preparation
  13. Fire Suppression System (add-on): parts preparation
  14. Preparing the Fire suppression system tube (add-on)
  15. Attaching the Fire suppression system tube (add-on)
  16. Securing the Fire suppression system tube (add-on): right side
  17. Securing the Fire suppression system tube (add-on): left side
  18. Installing the top panel
  19. Preparing the top window panel
  20. Mounting the top window panel
  21. MINI Back panel: parts preparation
  22. Installing the back panel
  23. Advanced filtration system (add-on): parts preparation
  24. Assembling the filtration: parts preparation (add-on)
  25. Assembling the filtration (add-on)
  26. Assembling the filtration (add-on)
  27. Assembling the filtration (add-on)
  28. Installing the blower (add-on)
  29. Inserting the HEPA filter (add-on)
  30. Inserting the HEPA filter (add-on)
  31. Installing the filtration (add-on)
  32. Side panels: parts preparation
  33. Installing the side panel
  34. Transport handle (optional): parts preparation
  35. Installing the transport handle (optional)
  36. Mounting the transport handle (optional)
  37. White LED strip (add-on): parts preparation
  38. Assembling the LED strip (add-on)
  39. Assembling the LED strip (add-on)
  40. Mounting the LED strip (add-on)
  41. LED cable: parts preparation (add-on)
  42. Guiding the LED cable (add-on)
  43. Guiding the filtration cable: parts preparation (add-on)
  44. Guiding the add-on cables: filtration cable (add-on)
  45. USB cable: parts preparation
  46. Inserting the USB cable
  47. PSU: parts preparation (add-on)
  48. Guiding the PSU cable (add-on)
  49. Releasing the front foot (add-on)
  50. Securing the PSU cable (add-on)
  51. Printer PSU preparing
  52. Inserting the printer PSU cable
  53. Securing the printer PSU cable
  54. Basic Board: parts preparation (add-on)
  55. Installing the Basic Board (add-on)
  56. Installing the Basic Board (add-on)
  57. Assembling the Basic Board (add-on)
  58. Mounting the Basic Board (add-on)
  59. Connecting the Basic Board (add-on)
  60. PSU holder clarification (optional)
  61. PSU holder: parts preparation (optional)
  62. PSU holder nut preparation (optional)
  63. PSU holder preparation (optional)
  64. Attaching the PSU holder (optional)
  65. Securing the PSUs (optional)
  66. Door hinges: parts preparation
  67. Assembling the hinges
  68. Mounting the hinges
  69. Mechanical lock (add-on): parts preparation
  70. Assembling the lock insert (add-on): parts preparation
  71. Assembling the lock housing (add-on)
  72. Securing the lock housing (add-on)
  73. Assembling the lock mechanism (add-on): parts preparation
  74. Assembling the lock mechanism (add-on)
  75. Securing the lock mechanism (add-on)
  76. Installing the door panel (add-on): parts preparation
  77. Installing the door panel (add-on)
  78. Door assembly: parts preparation
  79. Installing the door panel
  80. ドアハンドルの組み立て
  81. Haribo休憩タイムです!
  82. グッジョブ！
• 3. Installing the printer
• Manual changelog MINI Enclosure