JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Brightness adjustment (SL1)

Menu
Relevant for:
Last updated 3 years ago
This article is also available in following languages: 
ENCSPLDEESITFR

Starting from firmware 1.5.0, you are able to manually set the backlight intensity in the SL1. You can also configure a screensaver timer of how long the screen should be on.

You can find the options in LCD menu -> Settings -> Touchscreen.

Parameters

Screensaver timer

After the configured time, the screen will turn off completely. You can turn the screen back on by touching it.

The Screensaver timer has these possible values:

  • Off
  • 10 s
  • 30 s
  • 1 min
  • 5 min
  • 30 min

Touch screen brightness

Touch screen brightness can be adjusted from 10% to 100%.

Saving settings

Once you set the brightness and timer, just leave the menu by the Back option. Once you select any other menu or leave the Settings menu, the printer will ask if you want to save the settings chosen. Click Yes to keep them, and No to revert to the previous values.

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us