Español
1. Two Spoolholder types
Paso 1 de 16 (Capítulo 7 de 18)
Contenidos
Comentarios
In this chapter, we will assemble the spool holders. Before proceeding, note that there are two types:
⬢1. Current Injection-molded spoolholder
Currently shipped in the MK4/S or CORE One versions. Continue to Injection molded spoolholder: parts preparation
⬢
2. Legacy vacuum-formed spoolholder
This old version used to come with the first MK3S versions or older upgraded units.
Continue to the Vacuum formed holder parts preparation
If the large portion of the box is occupied by the rectangular black trays, you have the first version, the older vacuum-formed spoolholders.
Contenidos
Ensamblaje Original Prusa MMU3 (incluye actualización de MMU2S)
- 1. Introducción
- 2. Desmontaje MMU2S (UPG)
- 3. Desmontaje Buffer MMU2S (UPG)
- 4. Montaje del cuerpo del tensor
- 5. Montaje del selector
- 6. Montaje del cuerpo de polea
- 7. Montaje Porta bobinas
- Two Spoolholder types
- Vacuum formed holder parts preparation
- Foam pads installation
- Rods, Bearings parts preparation
- Rods and bearings assembly
- Finishing up the Spoolholders (vac. form.)
- Injection molded spoolholder: parts preparation
- Injection molded holder parts preparation
- Montaje de la base (parte 1)
- Montaje de la base (parte 2)
- Instalación de las almohadillas de espuma (parte 1)
- Instalación de las almohadillas de espuma (parte 2)
- PTFE holder assembly
- Finishing up the Spoolholders (inj. mol.)
- Joining the Spoolholder Guides
- Buffer Types
- 8A. Montaje del Casete del buffer
- 8. Montaje Buffer CORE One
- 9A. MK4/S, MK3.9/S Nextruder mod
- 9B. Mod extrusor MK3S+ / MK3.5 (KIT)
- 9C. Extrusor MK3S+ (UPG)
- 9D. CORE One Nextruder mod
- 10A. Configuración y Calibración MK4/S, MK3.9/S
- 10B. Configuración y Calibración MK3S+
- 10C. MK3.5 Setup and Calibration
- 10D. CORE One Setup and Calibration
- 11. Primer comienzo
Comentarios
Inicia sesión para publicar un comentario
Sin comentarios