Español
1. Introduction
Paso 1 de 47 (Capítulo 12 de 18)
Contenidos
Comentarios
⬢This chapter guides you through the installation of the MMU3 into the Enclosure.
⬢The MMU3 can only be installed after the Hinged Lid is in place.
Since the MMU3 is compatible with multiple printer models, note that some parts of your printer may slightly differ from the pictures. However, the assembly process remains the same.
Contenidos
Montaje del Original Prusa Enclosure (montaje externo de la pantalla) (v1.03)
- 1. Introducción
- 2A. Preparación de la impresora (MK4/S y 3.9/S)
- 2A. Preparando la impresora (Fuente Negra MK3S+)
- 2B. Preparando la impresora (MK3S+ Fuente de alimentación Plateada)
- 3. Ensamblando el cerramiento
- 4A. Instalando la impresora (MK4/S y 3.9/S)
- 4A. Instalando la impresora (MK3S+ Fuente de alimentación Negra)
- 4C. Instalando la impresora (MK3S+ Fuente de alimentación Plateada)
- Registro de cambios del Manual del Cerramiento
- Sistema de Extinción de Incendios (complemento)
- Tapa abatible (complemento)
- Hinged Lid with MMU3 [Traducción en desarrollo]
- Introduction
- Piezas imprimibles
- LCD Removal
- Spool Holder Removal
- Filament Guide Removal
- PSU Removal
- Printer Removal
- MMU3 Installation
- Buffer Removal
- Spool Holders: Parts preparation
- Spool Holders Preparation 1
- Spool Holders Preparation 2
- Spool Holders Installation 1
- Spool Holders Installation 2
- Internal Lock parts preparation
- Internal Lock Preparation
- Internal Lock Installation
- PTFE Side Holder parts preparation
- PTFE Side Holder Preparation
- PTFE Side Holder Installation 1
- PTFE Side Holder Installation 2
- Covers Removal
- Buffer Mount: parts preparation
- Buffer Mount Installation
- PTFE Passthrough Installation
- Buffer Preparation 1
- Buffer Preparation 2
- Enclosure Buffer: parts preparation
- Magnets Installation
- Enclosure Buffer Assembly 1
- Enclosure Buffer Assembly 2
- Enclosure Buffer Assembly 3
- Enclosure Buffer Installation
- Printer Preparation
- Printer Installation
- PSU Installation
- Printer Positioning
- LCD Installation: parts preparation
- LCD Connection
- LCD Installation
- PTFE Tubes: part preparation
- PTFE Tube Installation 1
- PTFE Tube Installation 2
- PTFE Tube Installation 3
- PTFE Tube Installation 4
- Loading the Filaments
- Done
- Tapa abatible con MMU2S
- Sistema de filtración avanzado (complemento)
- Cerradura mecánica (complemento)
- Cable de alimentación de liberación rápida - Fuente Negra MK3S+ (complemento)
- Cable de alimentación de liberación rápida - Fuente Negra MK4/3.9 (complemento)
- Tira LED blanca (complemento)
Comentarios
Inicia sesión para publicar un comentario
Sin comentarios