English

Prusa Research a.s.

Prusa Research a.s.

Support
Original Prusa i3 MK2.5S
Printer maintenance
How to replace a heatbed thermistor (MK3S+/MK3S/MK2.5S/MK2S) | Begin assembly

1. Begin assembly

Step 1 of 17 (Chapter 4 of 8)

Contents

Comments

How to replace a heatbed thermistor (MK3S+/MK3S/MK2.5S/MK2S)

Difficulty
Moderate
Available languages

Contents

Printer maintenance

How to replace a heatbreak/heatsink/heaterblock (MK3S+/MK3S/MK2.5S/MMU2S)
How to trim PTFE tube - Multi Material
How to post-process the printed parts
How to replace a heatbed thermistor (MK3S+/MK3S/MK2.5S/MK2S)
1. Begin assembly
2. Getting the replacement set
3. Tools necessary for this guide
4. Getting the printer ready
5. Disconnecting the heatbed MK3S+/MK3S/MK3
6. Disconnecting the heatbed MK2.5S/MK2.5/MK2S
7. Removing the heatbed MK3S+/MK3S/MK3
8. Removing the heatbed MK2.5S/MK2.5/MK2S
9. Removing the cover and sleeve/wrap
10. Preparing the replacement set
11. Preparing the heatbed and thermistor
12. Fixing the thermistor in place
13. Fixing the thermistor in place
14. Reassembling the heatbed
15. Connecting the heatbed MK3S/MK3
16. Connecting the heatbed MK2.5S/MK2.5/MK2S
17. Final check
How to replace a hotend PTFE tube (MK3S+/MK3S/MK2.5S/MMU2S)
How to replace a hotend thermistor (MK2S)
How to trim PTFE tube - Original Prusa printers
Replacing the PEI sheet on the (MK3S/MK3/MK2.5S/MK2.5)

Comments

Log in to post a comment

No comments