P.I.N.D.A. senzor (1x)

Sonda Prusa INDuction Autoleveling je důležitou součástkou usnadňující kalibraci našich tiskáren. Existují 2 různé verze: V1, používaná v MK2/S, a V2, používaná v MK2.5, MK2.5S, MK3 a MK3S. Rozdíl je v tom, že V2 má vestavěný termistor, který kompenzuje rozdíl v měřeních za studena a za tepla. V1 a V2 nejsou zaměnitelné.

Temperature Calibration

All induction proximity probes alter the sensing distance with increased temperature. This might affect the quality of the first printed layer. P.I.N.D.A. v2 probe, included in…

K článku

First Layer Calibration (i3)

The First Layer Calibration is used to calibrate the distance between the tip of the nozzle and the print surface. The aim is to adjust the nozzle height until the extruded plastic…

K článku

XYZ Calibration (MK3/MK3S/MK3S+)

The XYZ calibration is a process, which checks, whether the printer was assembled correctly and the axes are perpendicular to each other. It measures the skew of your X/Y axis…

K článku

Nozzle crashed into the heatbed

If this occurs it indicates a problem with the P.I.N.D.A. or SuperPINDA sensor. P.I.N.D.A. stands for Prusa INDuction Auto leveling. It is the Z-axis end-stop on the MK2/S and…

K článku

Misaligned PINDA Sensor (MK2/S)

A misaligned P.I.N.D.A. Sensor is an issue that can be fixed by fine-tuning the printer. To do that, you need to calibrate the P.I.N.D.A. sensor position on multiple spots around…

K článku

P.I.N.D.A./SuperPINDA Sensor testing

P.I.N.D.A. stands for Prusa INDuction Autoleveling sensor and is a vital component facilitating the calibration of our printers. There are 3 different versions: P.I.N.D.A. V1…

K článku