⬢Place the side panel on the printer.
⬢Insérez délicatement le tube PTFE court du capteur de filament par l'ouverture de la poignée du capot latéral.
⬢Fix the side panel in place using 11x nylon rivets. Push one into each indicated hole, and the rivet will hold the side panel in place.
A spare bag of nylon rivets was included with the upgrade.
⬢Gently pull the PTFE tube and connect it back into the collet. Make sure to insert the tube all the way in.
⬢Place the side panel on the printer.
⬢Fix the side panel in place using 7x nylon rivets. Push one into each indicated hole, and the rivet will hold the side cover in place.
