1. Tools required

Prusa CORE One L to CORE One L+ upgrade [Traducción en desarrollo]

• 1. Introduction
• 2. Preparing the printer [Traducción en desarrollo]
  1. Tools required
  2. Removing the top cover
  3. Removing the door panel
  4. Protecting the heatbed
  5. Removing the plexiglass cover
  6. Removing the left side panel
  7. Removing the electronics covers
  8. Disconnecting the motor cables
  9. Removing the printhead cover
  10. Disconnecting the hotend
  11. Disconnecting the fan cables
  12. Removing the print fan
  13. Disconnecting the extruder motor cable
  14. Disconnecting the Accelerometer
  15. Disconnecting the main cable
  16. Disconnecting the NTC thermistor
  17. Disconnecting the PTFE tube
  18. Removing the hotend
  19. Removing the Hotend-cable-clip
  20. Removing the Nextruder
  21. Removing the Love board
  22. Removing the nextruder holder
  23. Removing the right cover
• 3. Belts upgrade
• 4. Assembling the Nextruder
• 5. Installing the nozzle wiper
• 6. Preflight check