EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Manual changelog

Manual changelog
Relevant for:
Last updated 4 years ago
Manual changelog
 Difficulty
Moderate
 Steps
9
 Available languages
CSPLESDEITFRJA
Versions history
Versions history
Versions of the MK3 manual:
11/2017 - Initial version 3.0
01/2018 - Updated to version 3.01
02/2018 - Updated to version 3.02
03/2018 - Updated to version 3.03
04/2018 - Updated to version 3.04
08/2018 - Updated to version 3.05
09/2018 - Updated to version 3.06
Changes to the manual (1)
Changes to the manual (1)
Changes to the manual (1)
01/2018 - Chapter 2 - Step 12
Y-holder-front and Y-holder-back part (first picture), replaced by new part Y-holder (second picture).
Y-holder is now the same for all four pieces, but the assembly remains the same as with the previous version.
Manual version 3.01
Changes to the manual (2)
Changes to the manual (2)
01/2018 - Chapter 7 - Step 2-10
Older heatbed cable cover (marked green) replaced with redesigned one (marked orange).
Installation steps are slightly different, in case you have new cover version (marked orange), please proceed for this part with the online version of the manual.
Manual version 3.01
Changes to the manual (3)
Changes to the manual (3)
Changes to the manual (3)
02/2018 - Chapter 7
The initial design for wrapping heatbed cables included NYLON filament and spiral wrap.
Starting February 2018 is the spiral wrap and NYLON filament replaced with the textile sleeve.
Each wrapping system has its own chapter 7. You can distinguish between them according to their name or using last step in chapter 6.
Current version of the printed manual includes textile sleeve, for spiral wrap please visit online version at manual.prusa3d.com
Manual version 3.02
Changes to the manual (4)
Changes to the manual (4)
Changes to the manual (4)
02/2018 - Chapter 3 & 4
Design of both X-end printed parts is updated. New tensioner enables easier belt post-tensioning. Chapter 3 includes one extra step. Chapter 4 includes more changes.
Design of the X-carriage printed part is updated. Belt holding mechanism is completely redesigned. Chapter 4 includes new steps including belt trimming.
The printed version of the manual includes instructions only for the newest design, for old design please use the online version.
Manual version 3.02
Changes to the manual (5)
Changes to the manual (5)
Changes to the manual (5)
03/2018 - Chapter 5 & 8
Assembly of the Extruder updated according to the user's feedback and internal testing. The nylon filament is inserted earlier and surrounding steps were adjusted accordingly.
New spool holder is introduced. This version requires assembly. See the last steps of Chapter 8.
Small improvements across all chapters.
Manual version 3.03
Changes to the manual (6)
Changes to the manual (6)
Changes to the manual (6)
04/2018 - Chapter 7 (Textile sleeve)
Assembly of the heatbed with the textile sleeve updated. In case the wires, aren't soldered user has to tighten the cable to the heatbed using M3 screws and nuts.
Recommended torque for M5x16r screws added, see Y-axis chapter.
Manual version 3.04
Changes to the manual (7)
Changes to the manual (7)
Changes to the manual (7)
Changes to the manual (7)
08/2018 - Chapter 5 (Extruder parts)
In order to improve cooling efficiency, there are new extruder parts version B7/R3. The assembly process is mostly the same as before. For steps which differ or are completely new, the user is informed and all details are explained.
Extruder body (compared with previous B6)
Extruder cover (compared with previous B6)
Nozzle-fan-45
Nozzle-fan-45-support
More information including direct comparison can be found on our Prusa Research forum.
Manual version 3.05
Changes to the manual (8)
Changes to the manual (8)
Changes to the manual (8)
09/2018 - Chapter 5 (textile sleeve) and Chapter 8 (Einsy case)
There is an update to the cable management for the extruder. Previously used spiral wrap is replaced with a textile sleeve. Also there is an update to the position of the zip ties.
The case for the Einsy board was updated to provide easier assembly of the cable bundles and also to enable easier access to the optional Raspberry Pi Zero W.
Manual version 3.06
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us