1. Introduction

Relevant for:

Last updated 3 months ago

Difficulty

Very easy

Steps

Available languages

Step 1 General information

The package with the printer is heavy! Always ask another person for help with handling.

⬢For the assembly, prepare a clean workbench with a space of at least 1 m x 1 m (40 in x 40 in).

⬢We're recommending a bright light above your workbench. Some parts of the printer are dark and inadequate light could make a very difficult procedure.

Step 2 What awaits you during the unpacking

Because of transportation, some of the fragile parts must be safely packed separately in the printer package. This manual will take you through the installation of these parts on the printer.

⬢These parts will be installed:

⬢xLCD assembly

⬢Multi-Tool nextruder assembly

⬢Spool holder

⬢Wi-Fi antenna

Step 3 Tools in the package

⬢The package includes:

Some of the tools are intended primarily for regular printer maintenance. You won't need them for this manual. At the beginning of the assembly chapter is a list of the necessary tools.

⬢Torx key TX6, TX8, TX10

⬢Allen key 2.5 mm, 4.0 mm

⬢Wrench 13-16

⬢Universal wrench

⬢T10 screwdriver

⬢Philips PH2 screwdriver

⬢The printer's package contains a lubricant, which is intended for maintenance. No need to apply it during the assembly. There is a dedicated online manual Regular printer maintenance.

Step 4 Labels guide

⬢All the boxes and bags including parts for the build are labeled.

⬢The LCD Fasteners bag includes an extra spare of each part contained in the bag. The amount of spare parts is written on the label. This number is included in the total number of each type of part.