CS
  • English
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Přihlásit

Original Prusa XL electronics

Relevantní pro:
Poslední aktualizace 4 months ago
Tento článek je také dostupný v následujících jazycích: 
ENPLDEESITFRJA

The Original Prusa XL is equipped with multiple electronic boards. The number of boards depends on the number of tools. 

The slots on the electronic boards have a label near them indicating the component to connect to each slot.

Printer Rear

Sandwich board

The Sandwich board is the main board with PCIe slots for other boards (e.g. XLBuddy), as well as connectors for many of the printer components, including motors, tool heads, LCD, and others. 

XLBuddy board

The XLBuddy board is the main control board of the printer. It is slotted into the sandwich board. The antenna cable is connected to it. 

XL Splitter board (five-head)

The five-head version of the XL is equipped with the XL Splitter board. The Dwarf boards for Nextruders 3, 4, and 5 are connected to it. The board is slotted into the Sandwich board. 

The single-head and dual-head versions of the XL are not equipped with the XL Splitter board. 

Tool head

Dwarf board

Each tool is equipped with its own control board, the Dwarf board. An XL printer has as many Dwarf boards as there are tools. All the components that control each Nextruder are connected to its respective Dwarf board. 

Cheese board (multi-tool)

On multi-tool versions of the Original Prusa XL (dual-head, five-head) each tool is equipped with its own Cheese board. This includes a circuit board, 3 hexagonal positioning pins, 2 carrying pins, and 2 nozzle LEDs.

Each Cheese board is connected to its respective Dwarf board. 

The Cheese board is part of the Tool Changer mechanism. Once the pins are removed, we are left with the Cheese board. Below is a drawing of the Cheese board from the rear and the front

Modular bed board

The Modular bed board is located under the heatbed, and controls the heatbed and its tiles. All heatbed segments are plugged into this board. 

Byl tento článek užitečný?

Komentáře

Stále nemáte jasno?

Stále nemáte jasno?

Pokud nemůžete najít odpověď na vaši otázku, projděte si naše další materiály na webu.
A pokud nenajdete odpověď, pošlete nám zprávu na [email protected] nebo přes tlačítko níže.

Kontaktujte nás