CS
  • English
  • Italiano
  • Deutsch
  • Polski
  • Français
Přihlásit

HT90 - Power Consumption

Relevantní pro:
Poslední aktualizace a month ago
Tento článek je také dostupný v následujících jazycích: 
ENPLDEITFR

The Prusa Pro HT90 features many elements, including among others an actively heated chamber, a high-performance heatbed, and a choice of high-flow or high-temperature hotend. 

The exact amount of power consumption from the printer depends on the specific type of material, but in general, the following peak power consumption specifications apply: 

  • Voltage 230 V, peak power 1900 W 
  • Voltage 110 V, peak power 1800 W 

Please note that the printer does not have a switching system for the supported AC voltages. The printer supports one AC voltage, depending on the chosen version. 

The printer does not have a power recovery feature, such as power panic. In many cases, on most materials printed with HT90, a power panic feature would not be useful, as the cooling of the chamber would already result in a print failure. 

A temporary power outage can be solved using an external, third-party UPS (Uninterruptible Power Supply). Though this is fully optional, it can prove useful for temporary power outages, preventing a print fail in that situation. 

Byl tento článek užitečný?

Komentáře

Stále nemáte jasno?

Stále nemáte jasno?

Pokud nemůžete najít odpověď na vaši otázku, projděte si naše další materiály na webu.
A pokud nenajdete odpověď, pošlete nám zprávu na [email protected] nebo přes tlačítko níže.

Kontaktujte nás