⬢Versions of the MK4 manual:
⬢06/2023 - Initial version 1.0
⬢07/2023 - Updated to version 1.01
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
- Home
- MK4
- Assembly manuals
- Original Prusa MK4 kit assembly
- Manual changelog MK4 kit
Manual changelog MK4 kit
Menu
- Original Prusa MK4 kit assembly
- 1. Introduction
- 2. Frame assembly
- 3. X-axis & X-carriage assembly
- 4. Z-axis assembly
- 5. Nextruder assembly
- 6. xLCD assembly
- 7. Y-carriage & Heatbed assembly
- 8. Preflight check
- Manual changelog MK4 kit
- 1. Version history
- 2. Changes to the manual (1)
Manual changelog MK4 kit
Relevant for:
Last updated 10 months ago Difficulty
Very easy Steps
2 Available languages
⬢07/2023 - xLCD assembly
⬢Added instructions for the new xLCD.
⬢Mentioned the new version of the Power panic cable (black and white wires).
Manual version 1.01
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.