1. Iniziare il montaggio

Manutenzione della stampante

• Come installare l'adattatore Ugello Nextruder V6 (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• Come sostituire un gruppo hotend (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L) [Traduzione in corso]
  1. Iniziare il montaggio
  2. Introduction
  3. Attrezzi necessari per questa guida
  4. Preparing the printer (part 1)
  5. Preparing the printer (part 2)
  6. Protecting the heatbed
  7. Removing the side panel
  8. Disassembling the filament sensor
  9. Rimuovere il sensore di filamento
  10. Parts preparation: IR filament sensor
  11. Connecting the IR filament sensor
  12. Installing the IR filament sensor
  13. Mounting the filament sensor
  14. Re-attaching the side cover
  15. Testing the filament sensor (Part 1)
  16. Testing the filament sensor (Part 2)
  17. Well done!
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)