1. Iniziare il montaggio

Manutenzione della stampante

• Come installare l'adattatore Ugello Nextruder V6 (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• Come sostituire un gruppo hotend (CORE One L)
• How to replace the hotend fan (CORE One L) [Traduzione in corso]
  1. Iniziare il montaggio
  2. Introduzione
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend fan cable
  9. Disconnecting the hotend cables
  10. Removing the hotend assembly
  11. Scollegare i cavi della ventola dell'hotend e del termistore
  12. Accedere alla clip Hotend-cable-clip
  13. Removing the hotend fan
  14. Hotend fan parts preparation
  15. Montare la nuova ventola hotend
  16. Montare la clip Hotend-cable-clip
  17. Collegamento dei cavi della ventola dell'hotend e del termistore
  18. Inserire l'hotend
  19. Controllare l'ugello
  20. Connecting the hotend cables
  21. Guiding the hotend cables
  22. Montaggio della copertura Printhead-cover-left
  23. Attaching the printer top cover
  24. Turning the printer on
  25. Controllo finale
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)