1. Begin assembly

Printer maintenance

• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• Packing the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• Packing the Prusa CORE One for return - Custom Packing material
  1. Begin assembly
  2. Introduction
  3. Prerequisites
  4. Tools necessary for this guide
  5. Necessary custom packing materials
  6. Printer preparation
  7. Removing the accessories
  8. How to remove the bezel
  9. Removing the bezel
  10. xLCD detaching
  11. xLCD disconnecting
  12. Securing the bezel
  13. Packing the acessories
  14. Securing the CoreXY
  15. Bottom and corner padding
  16. Placing the printer in the box
  17. Accessories and top layer
  18. Sealing the box
• How to replace a hotend assembly (CORE One)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)