USB Device Overcurrent #17307 (XL)

Este artículo está también disponible en los siguientes idiomas: 

What happened?

The Original Prusa XL is showing the message "Overcurrent detected on the connected USB device, disconnect it."

Error name: USB Device Overcurrent

Error code: #17307

The error is shown when there is an issue with the USB drive connected to the printer. In case you are using a USB-to-USB cable to connect the USB drive, the cable might also be causing the issue. 

How to fix it? 

Replace the USB drive to use on the printer. Ensure that the replacement USB drive is formatted to FAT32 before operating it on the printer for the first time.